How to Clean Mechanic Hands ?

GearHaunt is reader-supported. If you buy an item through the links on this site, we may earn a small commission at no extra cost to you. Learn more

If you are a mechanic, grease is your everyday neighbor. And your hands need to suffer the most when it comes to grease and oil while you work. So, cleaning your hands properly is a necessity for you!

The regular hand-cleaning process is not enough for your dirty lubricious hands. And this is why you must hear how to clean mechanic hands in the right manner! 

Let us take you on a tour of how you can get rid of your greasy-breezy hands and get back the clean hands once again! 

Prepare the Requisites 

Whenever you plan to clean your mechanic hands, the first thing you need to take care of is the preparations for the process. In between cleaning the hands, you cannot move here and there to find the necessary equipment or ingredients. 

Ingredients 

First of all, get some petroleum jelly for the procedure. Get mineral oil for taking off the grease. Along with this, for the scrubbing part, you will need sugar. If you don’t have sugar, settle for some salt. 

In this process, don’t forget the dish soap and soaps for the final cleaning. Keep in mind that you have to wash the hands right after you are done with your work. 

Things to Remember

When your hands get exposed, there can be permanent stains on them if you don’t learn how to clean mechanic hands. 

And to avoid it, you have to act fast. On the other hand, do not keep the hand dry after work. This will absorb the grease. If there is engine oil, the hands will absorb it too. Eventually, the skin will be stained. 

Hand cleaners are great for cleaning hands but if they get grease most of the time, you can try creams or moisturizers that keep them away from getting greasy (at least as much as they can.)

Necessary skincare is also needed if you have mechanic hands. Otherwise, it will take a good deal of time to get the stains out of your hands. 

Step by Step Process for Cleaning Mechanic Hands 

Step 1: Basic Cleaning 

Just after you are done with your work, you must get your hands on soap and clean your hands initially with that. You should settle for a block of bar soap. But store-bought liquid soap will work for it too! 

In this process, your intention should be to clean as much oil as you can. Rinse your hand with water after using the soap. No matter how much you try, there will surely be some oil or grease left on your hands. 

And a bar soap or a liquid soap will not be able to clean it off. If you are a mechanic, dish soap can be highly beneficial for you. This can take off take grease and extra oil by breaking the bond. 

After using any soap, ensure that you are using enough water to get the soap and greasy away from your hands. If you see that your hands are still not cleaned and they feel greasy, you can go through the next step for reassurance. 

Note: Do not use dish soap if you don’t have mechanic hands. This is only recommended for extra greasy hands. You will end up damaging the skin if you use dish soap in a non-grease hand regularly. 

Step 2: The Scrubbing 

This is one of the most powerful steps that can remove all the grease and oil you have on your hands. We always recommend that as a mechanic, you must certify that you are doing this step. 

When you have passed a day with a lot of greases, you can run this step and get completely clean hands! For this step, you will need a spoon full of sugar. Crystallized sugar is the best scrub they say. 

As we have told before, salt can be used as a substitute for sugar. Now, place the sugar in a pot and add some water there. With these two ingredients, you have to create a paste that you can apply to your hands.

Now, take the paste on your one palm and start scrubbing both of your hands. Take a toothbrush and start scrubbing your hands with that. While scrubbing, make sure you don’t only go through the surface but also clean the nails along with each corner of your hands. 

It will take off all the extra grease that is left on your skin. After the process is done, you must add some more regular soap and wash your hand with water. 

Note: If you want, you can use a pumice stone for buffing the hands in this step too. This is not compulsory but this will increase the chances of proper cleaning. 

Step 3: Oil for Oil 

This step is specially made for the super-greasy days that you hate! You can remove the oil by taking the help of oil. As you are a mechanic, you know which sorts of oil you are going to face. 

To remove this, you can use a different sort of oil too! We know, it is a tad bit complicated to understand but we will explain it. Get your hands on regular olive oil and use it as an oil cleanser. If your hands are rougher these days and you can settle for something gentle. 

In that case, you can settle for baby oil too. These sorts of oil can help you remove the grease or oil from your work naturally. Get this oil and add a little bit to your palm. Start rubbing the oil slowly on your hand. 

Make sure you go through the fingers and the nails too. After rubbing for a while, you have to wash your hands once again. Get some detergent and rub it on the hands. Then rinse it off with clean water. 

Note: You can repeat the process if you need. In some cases, one time is not enough for removing oil from the too-greasy hands. Repeat the process if necessary. 

Step 4: Moisturizing the Hands 

The last step of this process is the most important. As your hands have gone through mechanic work and then too many chemicals, you must ensure that you moisturize your hands with care. 

If you do not moisturize your hands, they will get dry as you have used a lot of products. Any good-grade moisturizer or oil will work for this. 

Wrap Up 

As you have learned how to clean mechanic hands, now you can get your hands through all the greasy-days and come back clean! All you need to do is take care of your hands when you are done with your mechanic work! 

Comment below if you know any other method on how to clean mechanic hands with care. Also, let us know how you take care of your hands after cleaning.