5 Best General Purpose Table Saw Blade: A Comprehensive Guide

GearHaunt is reader-supported. If you buy an item through the links on this site, we may earn a small commission at no extra cost to you. Learn more

Are you looking for a table saw blade that you can use for every purpose, especially softwood, hardwood, or plywood? Then the general-purpose table saw blade meets your needs. The sort of table saw blade you need depends on its intended function. For softwood, hardwood, or plywood, an all-purpose table saw blade might be best.

A general-purpose blade might not cut nicely when cutting dovetails or other joinery techniques that need a crosscut. It may even ruin your project due to the lack of allowance for such cuts. So, before we get to our list of blades, let’s speak about significant edges.

It would be best if you determined what materials work best with the table saw. Hardwood, plywood, or softwood? Or masonite? What is the material thickness that you need to cut through without safely and efficiently harming your blade?

The tooth count of your general-purpose blade is also an essential factor. For example, a 24-tooth count blade is suitable for rip cuts, while crosscuts require a tooth count of 80-120 depending on the wood used. 

The more teeth on a blade mean the less chance of backlash during cutting. In addition, higher tooth count blades offer smoother cuts with no sharp edges. The ideal saw blade for plywood is one with 80 or more teeth per inch.

5 Best General Purpose Table Saw Blade

ImageProduct NameKey FeaturesPrice
DEWALT-10-Inch-Miter-Table-DEWALT Miter / Table Saw Blades1. Material: Carbide
2. Arbor: 5/8-Inches
3. Number Of Teeth: 60
Check Price
Forrest-Woodworker-Circular-1Forrest Woodworker table Saw Blade1. Arbor: 5/8-Inches
2. Number Of Teeth: 30
3. Material: C-4 Carbide
Check Price
3.-Freud-General-Purpose-TaFreud General Purpose Table Saw Blade1. Arbor: 5/8-Inches
2. Number Of Teeth: 24
3. Material: Blend
Check Price
Diablo-10-50-tooth-ATB-CombDiablo General Purpose Saw Blade1. Arbor: 5/8-Inches
2. Number Of Teeth: 50
3. Material: Micro grain Titanium Carbide
Check Price
Amana-Tool-Carbide-Tipped-PAmana Tool General Purpose Blade1. Arbor: 5/8-Inches
2. Number Of Teeth: 40
3. Material: Carbide
Check Price

1. DEWALT 10-Inch Miter / Table Saw Blades

Best General Purpose Table Saw Blade

The DEWALT 10-Inch general-purpose saw provides a fine finish cut with its 60 teeth per inch. With this blade, you can make accurate crosscuts on any material and achieve professional results for woodwork projects of all kinds.

It is a versatile saw blade used in table and miter saws to save time. You never have to worry about cutting wood the same way twice with these two blades. The teeth on each one are designed for a specific purpose. 

It is a high-grade saw blade and comes with 60 thin kerf teeth. Its thinner kerf allows you to cut through materials swiftly and correctly without sacrificing quality. In addition, the blade plate has been computer-balanced for improved cutting accuracy, which will give your projects smoother finishes on every cut.

We use this saw blade in many different applications from workshops. It is a 10-inch carbide blade that cuts through anything. They don’t overheat or scorch your material, and they’re different from standard abrasives, which save their integrity and balance. So, you won’t see any cracking or denting at high pressure applied to them.

The lightweight design makes it easy handling, so don’t let its small size fool ya – this little guy packs quite a punch when working up some severe wood material.

  • Its tungsten carbide raw material makes It one of the most robust general-purpose saw blades.
  • Its computer-balanced plate reduces vibration and ensures accurate finish cuts.
  • You can use this general-purpose blade in the miter saw, and table saw as well.
  • This saw blade can bear a large number of heats.
  • You can use this blade in many applications., like hardwood, softwood, and plywood.
  • This blade is not much suitable for crosscuts.
  • You have to sharpen this blade very often.

2. Forrest Woodworker Circular Saw Blade

Forrest Woodworker Circular Saw Blade

Forrest’s new Woodworker II blades are some of the best you can buy. They feature super hard, long life C-4 carbide teeth on laser cut plates that have been hand straightened to a maximum runout of .002″.

These top-notch razors slice and crosscut smoothly with little tear-out. All 10-inches diameter saw blades also fit 5/8 inch arbor slots, so they’re perfect for use in any table saw model from 6mm up to 12 gauge deep stroke motors too.

It is made right here at home USA by Forrest themselves. These high-quality tools will last a long time. The excellent cut of Forrest’s blades leaves a rip-cut saw blade that is as smooth as sanded and a crosscut edge that is practically mark-free. As a result, the blades run quietly, and the plywood backside tear-out is minimal.

The blade is used radial and table saw trimming and crosscutting. It is constructed of polished steel and is suitable for cutting wood, plywood, and other materials. An alternate top angle of 30 degrees ensures clean cuts with slight splintering. There’s also a 5-degree angle hook to assist it in cutting straight lines without sag.

  • This blade is well known for rip and crosscut.
  • The blades operate in a taciturn manner, and reverse tear out in plywood is extremely low.
  • C-4 carbide has increased its durability.
  • You can return this blade within 30 days if you are not happy with it.
  • You can use this general-purpose blade to cut miter slots.
  • This blade doesn’t come with flat kerf.
  • This blade has overheating issues.

3. Freud 10″ x 24T General Purpose Table Saw Blade

FreudGeneral Purpose Table Saw Blade

The FREUD 10-inches heavy-duty rip table saw blade is an excellent choice for anyone who does a lot of ripping or crosscutting. The teeth on this blade have improved to ensure accuracy, with 24 Teeth explicitly made to cut hardwood, and it also helps for shaving wood during deep cuts. These features make it easier than ever before.

With its laser-cut edge, the blade is both sharper and safer to work with. In addition, it’s designed for precision so that you can cut through any material without damage or splintering of wood when in use.

Additionally, this innovative product comes equipped with a nonstick coating that ensures there are zero chances of rust stains on your hands after finishing up some projects around the house – meaning cleaner sandblasted cabinets every time.

This 10-inch table saw blade in the market is with this Stanley Tin Snips. Unfortunately, it won’t slip off as other saw blades do. You will be swapping out your current blade for an upgraded version once it becomes dull or worn down. You can also use these tin snips to cut through some metal instead of just wood as traditional ones would.

  • You can use this best table saw blade in wood fibers as well as in metals.
  • It doesn’t produce splinter while cutting.
  • This blade provides smooth cuts without sanding.
  • Its coating protects this blade from deterioration and slope buildup.
  • This is highly a sharp table saw blade.
  • This blade has a limitation on RPM issues.
  • It seems a bit pricey compared to other brands.

4. Diablo 50-tooth ATB Combo Saw Blade

Diablo tooth ATB Combo Saw Blade

If you’re looking for a blade that will help you achieve the highest degree of precision, then the Freud D1050X Diablo ATB combo saw blade might satisfy you. This blade works excellent with both cutting and ripping projects because they last long enough to cut through hardwoods without dulling or losing their edge.

The teeth of this saw are resilient to even the most brutal hits and bumps. It makes clean cuts, leaving no rough edges or chipping. The 10″ table saw blade is perfect for cutting large pieces of wood with accuracy and clean-cut. This means it won’t splinter or kickback, keeping you safe from harm.

The Diablo is equipped with 50 teeth made of Hi-Density carbide, which significantly increases its lifespan. This durable blade provides precision cuts on even the most delicate woodwork projects. In addition, the blade’s Perma Shield coating prevents retention while making crosscut operations easy as pie.

There are so many reasons you should invest in this best table saw blade, but the best part about them? They come with an excellent case. In addition, the heavy-duty hardcover provides complete protection for any project.

  • Table saw blades are pretty versatile, and this one is no exception.
  • This blade comes with many features like stabilizer vents, heat expansion, and a laser-cut arbor.
  • Its tr-metal shock resistance and carbide material make it the most durable table saw blade in the marketplace.
  • It is one of the best heavy-duty table saw blades.
  • It provides a smooth and accurate cut.
  • This blade has smokes issues.

5. Amana Tool Carbide Tipped Prestige General Purpose Blade

Amana Tool Carbide Tipped Prestige General Purpose Blade

The new and improved general-purpose blade is the perfect tool for cutting wood, plywood, MDF, or chipboard. This full kerf wild beast will leave your projects smooth as silk with no tear-out on solid material such as oak. 

The massive .102″ thick steel plate has expansion slots that reduce vibration during operation to give you a clean cut every time. In addition, its stainless steel shanks allow this ax head enough teeth lengthwise. 

So, there’s never any struggle when using it, crosscutting those boards straight down the middle like butter.

Its 40 teeth are grounded with a steep angle of 20° bevel, carefully placed on each alternate left and right side for crisp cuts. It acts as the flywheel in your saw, causing it to spin great while making excellent crosscuts without any hiccups or jams.

Because, after all, that’s what the most exemplary best table saw blades are all about replacing 50 teeth combination blades. It might have become obsolete over time due to its mediocre performance against the new problems that the industry is facing today.

  • This blade is easy to use
  • Its carbide materials keep the blade sharper for a long time.
  • This all-purpose table saw blade provides quality cuts and excellent finishes.
  • This blade comes with a saw-stop safety feature.
  • Its 20-degree bevel angle offers a clean-cut, so you don’t need to sand.
  • You can use this general-purpose table saw blade in a variety of applications.
  • Its price seems a bit high than other brands compared to its features and quality.

Buying Guide: The Best Table Saw Blade for General Purpose Applications

Table Saw Blade Kerf

The kerf of a table saw blade is the cut thickness given in thousandths of an inch. The general-purpose blades have a thickness between 0.125 and 0.139 inches at their widest point, known as the “kerf.”

If your table saw accepts multiple blade sizes, go with the smallest one. For example, when cutting softwoods like pine plywood, a broad cutter profile may cause tear-out.

Larger kerf blades provide more airflow and noise, applicable when cutting more complex materials like solid wood or engineered wood fibers product like MDF (medium-density fiberboard).

Thin-kerf blades can cut faster than the wider kerf’ blades. The greatest general-purpose knives intend to work well on soft and hardwoods without compromising speed or performance.

If you plan to use your saw primarily for ripping lumber, choose a general-purpose table saw blade. The most extraordinary general-purpose blades work well on soft and solid wood without compromising speed or performance.

Table Saw Blade Teeth

The best table saw blades for cutting softwood materials such as plywood or fir will have many teeth to provide the best possible finish with the least amount of tear-out. 

If you cut harder wood products like laminated veneers and MDF, then a blade with fewer smaller teeth counts blade will be perfect. Less tooth count blades can remove material more quickly without bogging down when used on these types of hardwoods.

In general, when using a general-purpose table saw blade, set it at no less than 60 tooth count per inch (TPI), while 40 TPI is usually suitable for fine-quality cuts in most wood species. 

In contrast, if you plan to use your table saw blade for cutting engineered wood fibers like MDF, then you’ll want to choose a blade that has between 24 and 32 tooth counts.

 Of course, you can go higher than this range, but not lower since it may cause the all-purpose table saw blade to bog down while ripping these types of hardwood materials.

Table saw Blade Teeth Configuration

The best table saw blades for softwood materials such as plywood or fir will have a large number of teeth to produce the most excellent possible finish while causing the least amount of tear-out during the cutting process.

For dense materials such as laminated veneers and MDF, on the other hand, a blade with fewer smaller teeth may be preferable since they can remove material more quickly without bogging down when used on these sorts of hardwoods. If you have any questions, please comment below on this article.

Alternate Top Bevel (ATB)

The general-purpose table saw blades have a top bevel with alternating teeth. Therefore, it is generally referred to as an “Alternate Top Bevel” or ATB grind. It will help prevent tear-out when cutting different wood species while producing a better finish on the board. 

In addition, when each tooth removes material from its opposing face simultaneously, it results in less burning than the other blade types. Such as double-sided rip (DSR) uses two teeth for ripping cut but only one set of teeth on the opposite side for crosscuts.

Combination (Comb)

A general-purpose table saw blade with a combination tooth pattern will have alternating top bevels and flat-top gullets separated by raker teeth. This configuration is designed for general purpose cutting. 

However, it may lack the smooth finish that you might get from an ATB or FTG general-purpose table saw blade. In addition, the design can create more burning on softer woods.

Flat-Top (FT)

Flat-tops are teeth with a beveled edge designed for quick cuts in wood. The kerf area is high enough that it doesn’t get caught on adjacent material and can cut cleanly through even thick pieces of timber. 

Making these types suitable for carpentry requires simultaneously removing large amounts from an object, such as cutting down trees or building houses out of logs. 

Frederick Winslow Taylor initially developed flat Top (FT) Teeth to provide him with the ability he had always desired. He turned complex movements into simple tasks while still performing them efficiently at speed without getting tired quickly.

High Alternate Top Bevel (Hi-ATB)

The High Alternate Top Bevel (hi-ATB) is intended for chip materials that are easily accessible, such as Melamine. Those blades have a sharper bevel angle than regular ATB saw blades, which allows them to cut more precisely and with a higher quality finish. 

When generating straight cuts without any wiper patterning from left to right across your work, these blades leave rough surfaces behind on softwoods due to their lack of precision.

Triple Chip Grind (TCG)

We use a triple chip grind (TCG) general-purpose table saw blade for ripping wood materials. However, it also works well at different crosscutting kinds of wood species while producing less burning than seen with other all-purpose table saw blade designs. 

The blades for cutting softwood materials such as plywood or fir will have many teeth to provide the best possible finish with the least amount of tear-out.

Solid Carbide

Manufacturers sometimes offer the best table saw blades made from solid carbide, which is even more challenging than high-speed steel (HSS). A solid carbide table saw blade provides an excellent balance between sharpness retention, strength, durability, and resistance to heat during heavy usage conditions.

Tooth Gullet

Manufacturers sometimes offer general-purpose table saw blades with varying tooth gullet sizes, which is essential to the overall performance of the saw blade. 

Companies often place essential information on the packaging about their general-purpose table saw blades, including their size. For example, some saw blades have smaller teeth and larger gullets. 

We use them for ripping different kinds of wood species while producing less burning than seen with other best general-purpose table saw blade designs.

Skip Tooth Pattern (ST)

The general-purpose blades also feature a skip pattern. Instead of having sharp points sticking out every time it cuts through the board. This feature reduces splintering along each edge and results when cutting through the general-purpose table saw blades in softwood and hardwood materials.

Table Saw Blade Types

There are many different types and styles of general-purpose table saw blades available on the market today, but how do you choose which one works best for your needs? 

Crosscut Blade

We use a crosscut style table saw blade for cutting wood on a table. The teeth are inclined to the right, resulting in parallel edges on opposing sides of each cut created by a single tooth on the cutting surface. 

When cutting across the grain of the wood, angled crosscut blades are an ideal choice because they minimize tear out along the bottom edge, where the grain runs in the opposite direction from that indicated by the blades’ angled crosscut blades.

Typically, they have 80 teeth in an ATB arrangement with thinner kerfs, making clean crosscuts in hardwood trees much more accessible than in softwoods such as pine or cedar. 

Put another way; crosscut blade style will be more successful on jobs where you need smoother, longer straight cuts than ripping through large chunks of material at once.

Ripping Blade

A ripping-style table saw blade has flat-top teeth that are parallel to the table’s surface. They are designed for ripping or sawing with the grain of a piece of wood, which means they will leave rough edges along each cut made by one tooth.

Ripping blades have either raker or gullet relief geometry on their backside, so it doesn’t clog up as easily while doing rip cuts.

Combination Blade

A combination blade has a tooth count between 30 and 50 teeth. Its configurations, gullets, and kerfs vary in shape between ATB (all-terrain) or FT (for Taiwan). 

Dado Blades

Dado blades come with a wider kerf. In addition, they create dados, which join boards together to make complex shapes like box joints or molding cuts. Many different types of woodworking tools can be made more convenient with these versatile accessories.

How to Change a Table Saw Blade

To avoid harm, make sure the table saw is unplugged, and no workpiece is attached. Before turning off your table saw, remove all accessories such as throat plates, rip fence guides, and miter gauges.

Remove any screws holding either side of the cover panel opposite the one where you will be removing your old, most good general-purpose blade.

Lift the panels straight up and away from the blades. Next, lay two blocks between the arbor (the spindle), and the table saw blade.

This will keep the all-purpose table saw blades from falling off while you remove the table saw blade and replace it. Then, finally, lift the blade from its arbor by either side before sliding out the old best all-purpose little buddy.

How to Clean a Table Saw Blade

Check the blade

When checking the blade for staining or sticky resin, be sure to get it all off. You might have to scrub a little before placing in water because this will cause kickback as your knife binds with wood and creates more friction which causes heat buildup, so there’s no need for excess waste here.

Put into the water

Now, put the blade into the water and drop a squirt of laundry detergent. Then slowly finger-dip it in the center hole while swirling around dish soap until it’s time to rest for five minutes or so before rinsing off thoroughly. If you don’t want to use water, you can use DW-40 spray for cleaning your best table saw blade.

Use the brush

For blades that have been stained, use a brush to scrub their surface and remove any remaining stains or debris. After removing any remaining stains and debris with a brush, carefully rinse the blade under hot water.

Dry the blade

Do not dry the blade of a table saw with just one towel. Instead, use an old kitchen cloth or thick pad that can easily absorb water at once and avoid rusting on your new tool.

To keep its surface from becoming dulled by moisture, always let it air-dry for 30 minutes before placing back in quarters inside of saw cabinet. Hence, prevent unnecessary risks regarding keeping this precious machine clean.

Final Word

When getting the most bang for your buck, buying just general-purpose blades is a good idea. These will provide a substantial improvement over the tools that came with your saw. Moreover, if done consistently over time, they can even increase the performance of your saw. However, if this isn’t enough, or if you want clean cuts along with increased useful life, special-purpose rippers/cutters may be the best option.

They are handy for those projects that necessitate the use of such tools, such as ripping wood into pieces of appropriate size while crosscutting angles on boards up against walls, among other things. Just keep in mind that you’ll need to put in some real effort to swap out this specialized equipment depending on exactly which activity needs to be completed at any particular time.

Make sure you’re ready for heavy-duty with valuable tools. They’ll last longer than expected and get to work quickly. Seek out saw blades that are durable, tough, accurate–and don’t forget powerful too. We hope our listed table saw blades would make sure your hard-earned money is worth it in return on every cut.